Volume 12, Issue 44 (9-2022)
مهندسی خوردگی 2022, 12(44): 31-39 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Effect of Ratio of Isocyanate to Hydroxyl Functional Groups on the Anticorrosion Properties of Polyurethane Coating in Acidic Solution Using Electrochemical Impedance Spectroscopy. مهندسی خوردگی 2022; 12 (44) :31-39
URL: http://journal.ica.ir/article-1-180-en.html
URL: http://journal.ica.ir/article-1-180-en.html
Abstract: (223 Views)
In this research, a two-component anti-corrosion coating based on polyurethane was made using polyacrylic resin and isocyanate hardener with different NCO/OH ratios. The anti-corrosion performance of these coatings was investigated using electrochemical impedance spectroscopy (EIS) with time in 1 M sulfuric acid. Equivalent circuit models were used to quantitatively compare the effect of the NCO/OH ratio on the anti-corrosion performance of polyurethane coatings. The results showed that with increasing the amount of hardener, the corrosion resistance of the coating first increases and then decreases and hence the best anti-corrosion performance of the coating was obtained at NCO/OH ratio of 1.2.
Type of Study: Research |
Subject:
General
Received: 2023/03/13 | Accepted: 2022/09/1 | Published: 2022/09/1
Received: 2023/03/13 | Accepted: 2022/09/1 | Published: 2022/09/1
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
