Volume 12, Issue 44 (9-2022)
مهندسی خوردگی 2022, 12(44): 41-51 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Evaluation of Corrosion Resistance of Weld Metal in x90 API-5L Micro Alloy Steel Joints with GTAW Process. مهندسی خوردگی 2022; 12 (44) :41-51
URL: http://journal.ica.ir/article-1-181-en.html
URL: http://journal.ica.ir/article-1-181-en.html
Abstract: (258 Views)
In this research, the corrosion resistance of weld metal in API-5L X90 micro-alloy steel joints was investigated. Welding was performed using filler metals ER120S-G, ER100S-G and ER90S-B3 by GTAW process. Microstructural studies were performed using light microscope and SEM scanning electron microscope. Microstructural studies showed that the base metal microstructure consists of ferrite and granular bentite. It was found that different weld metals all contain different amounts of accular Ferrite, polygonal ferrites and martensite / austenite (MA) islands. The highest amount of accular Ferrite was observed in ER 120 SG welding metal. The results of corrosion test showed that ER120SG welding metal and base metal had the lowest flow density and corrosion rate. And the highest corrosion rate was obtained for ER100SG welding metal.
Type of Study: Research |
Subject:
General
Received: 2023/03/13 | Accepted: 2022/09/1 | Published: 2022/09/1
Received: 2023/03/13 | Accepted: 2022/09/1 | Published: 2022/09/1
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
