Volume 15, Issue 3 (12-2025)
مهندسی خوردگی 2025, 15(3): 45-46 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Failure analysis of 7 inch pipes removed from the wastewater injection well of a crude oil desalination plant. مهندسی خوردگی 2025; 15 (3) :45-46
URL: http://journal.ica.ir/article-1-262-en.html
URL: http://journal.ica.ir/article-1-262-en.html
Abstract: (3 Views)
This research investigates the damage to 7 inch pipes removed from the water injection unit of a desalination plant. This study involved field investigation and research on the sections of pipe remove from service. In order to analyze the mechanism of failure, the microstructure quality of the alloy through chemical analysis and hardness testing was investigated. In addition, by examining the historical record of operations carried out to improve the well’s injectability and examining the corrosiveness of the waste water injection fluid of the desalination plant, the evidence and findings obtained were used to analyze the causes of the damaged and solutions were presented to reduce possibility of failure in similar equipment.
Keywords: water injection well, microstructure, hardness test, alloy quality, pickling operation, oil well, Corrosion
Type of Study: Research |
Subject:
General
Received: 2026/09/26 | Accepted: 2025/12/21 | Published: 2025/12/21
Received: 2026/09/26 | Accepted: 2025/12/21 | Published: 2025/12/21
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
